Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Our bicycle stems are strong and light!

No matter what your style of riding is. Bicycle Center in Port Charlotte has the widest selection of lightweight, and strong bicycle stems. Stems come in different lengths and rises no matter what your need is. Bicycle Center offers the widest selection of bike stems from Bontrager, profile design, ritchey, electra, crank brothers, zipp and more.

Syntace Megaforce 2
$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Bontrager Rhythm Comp Knock Block Stem-No Packaging
$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
Bontrager Elite Stem
$64.99
The perfect fit The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration. Product details - Blendr Elite allows seamless accessory integration - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Suitable for both MTB or road use - Includes Blendr mono base and accessory mounts
Bontrager RXL 7 Degree Factory Overstock Stem
$40.00 $89.99 56% Off
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
Dimension 25.4mm Threadless Stem
$32.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
Profile Design Aris Road Stem (+/-25-degree rise)
$49.99 - $59.99
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
FSA Omega Stem
$39.99
Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.
BOX Hollow Stem
$69.95 - $99.95
- Forged, CNC-machined 6061-T6 aluminum with hollow CrMo hex bolts - Open skeletal design and a dual mid-bolt wedge mounting system - 1" or 1-1/8" steerer clamp
Thomson BMX Stem
$99.95
BMX riders need tough components, which is why Thomson developed their BMX Stem. It can handle whatever you can dish out thanks to being constructed from a solid bar of 7000-series aluminum. Plus it's anodized to prevent corrosion and has tough heat-treated bolts. You'll also appreciate the 50mm-wide clamp for a super-secure handlebar and enhanced control, while Thomson's patented undercut around the bars provides even more stability. And, if you run a Gyro, Thomson's got you covered, too, thanks to the built-in spacer that eliminates the need for a separate, loose spacer. And, at only 255 grams, the BMX stem keeps your rig light for the toughest tricks and longest rail rides.
Race Face Turbine 35 Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Zipp SL Speed Stem
$265.00
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Sunlite Steel Touring Quill Stem
$13.99
• Steel • Polished-chrome finish • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • 10-inches tall (extra tall)
Renthal Apex Stem
$99.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Promax Banger Stem
$69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax Impact Stem
$69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
Ritchey WCS Carbon Solostreem Handlebar/Stem
$499.95
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
Origin8 Fix8 OS Stem
$43.99
Origin-8's Fix8 OS Stem is the perfect upgrade for your super-stylish fixed-gear bike and it'll work on mountain bikes, too. It's 3D forged from lightweight and durable 6061 aluminum and features a 4-bolt 31.8mm-diameter handlebar face clamp that holds fast and makes for quick and easy handlebar installation/removal. Plus, the opposing steerer clamp bolts apply more even holding force to keep your bars from changing position. At only 50mm long, the Fix8 is great for flatland tricks, bar spins, and anything else you come up with.
Origin8 Flux MTB/Road Stem
$64.99
Full CNC machined AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design - EN-Mountain safety certification
Origin8 Pro Fit Aluminum Ergo Stem
$29.99
- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Dimension 26.0mm Threadless Stem
$29.99 - $32.00
Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g
ENVE M6 Mountain Stem 31.8mm
$280.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 31.8mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (40mm), 92g (55mm), 99g (70mm), 104g (85mm)
FSA Energy Stem
$98.99
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.
Easton EA90 - ICM
$149.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
Easton EA90
$99.99
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy
Odyssey BOSS Stem
$64.99
Using Odyssey's popular TL48 stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 52mm reach - 35mm rise - 11 oz
TruVativ Descendant 35mm Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Promax S-35 Stem
$69.99
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
FSA OS-99 CSI Stem
$189.99
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)
Page 1 of 5 Next page