Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Bontrager Paradigm CX RSL Disc Tubular Road Wheel
$249.99 - $349.99
Cross is always coming Ready for your call-up? Punchy accelerations and twisty off-camber corners are no problem for this cyclocross-specific tubular wheel. The lightweight alloy rim has a wide profile specifically designed to support cross tires and features 108 points of engagement so that every ounce of energy you put down moves you forward, fast. Key features - Light and durable alloy tubular rim designed for cyclocross use - Rapid Drive 108 j-bend hub instantly transfers effort into forward momentum - 142/100 spacing with 12mm thru-axle front and rear, convertible to 15mm/5mm QR fr or 5mm QR rear - Center Lock disc hubs with interchangeable axles increase compatibility - 24 hole fr/r with DT Swiss bladed spokes, Alpina locking nipples - Designed and tested with elite riders from Telenet Fidea Lions - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, XD driver available
Bontrager Kovee Pro 30 TLR Boost 29 MTB Front Wheel
$579.99
A pro-level cross country MTB wheel with a wide internal rim width for the best tire support and performance available. The carbon difference If you want a lightweight XC wheel that's ready to race, look no further than Kovee Pro 30. It features a lightweight design and 29mm internal width for better traction and cornering performance so you can ride faster and with more confidence. Plus, the Rapid Drive 108 hub provides near instantaneous engagement so you get out exactly what you put in. - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 wider hub flanges enhance bracing angle for a stiffer wheel - Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width, 28 hole front/rear - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool
Bontrager Kovee Elite 23 TLR Boost 27.5
$314.99 - $384.99
Admit it—your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Elite 23 wheelset. Designed with the XC and trail rider in mind, these Boost-width wheels will shave weight and add stiffness to your ride. Key features: - OCLV carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 54 hub instantly transfers effort into forward momentum - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - Boost 110/148 wider hub flanges enhance bracing angle for stiffer wheel - Ultra-durable OCLV Carbon rim with 22.5mm internal 29mm external width 28 hole fr/r - 28 front/rear 14/15G spokes with alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool
Bontrager Aeolus Comp 5 TLR
$339.99 - $399.99
Affordable Aero Combine state-of-the-art aerodynamics with the benefits of tubeless ready, and you've got the Aeolus Comp 5 TLR road wheel. A classic aluminum rim with a seamlessly attached 50mm carbon fairing combine for a proven aero profile that has been wind tunnel tested to be incredibly fast. Aeolus Comp 5 TLR is a proven high-value option for the aero-conscious rider. Key features - Rim construction combines lightweight aluminum rim with a bonded carbon fiber fairing - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Aluminum with carbon rim construction (23mm outer, 17.5mm inner width) - Compatible with Shimano 10/11 speed, SRAM 10/11, - Includes Bontrager TLR rim strip, TLR valve stem, internal cam quick release, and traditional rim strip - DT bladed spokes 18fr, 24r, Alpina locking nipples - No rider weight restrictions
Bontrager Line Pro 30 TLR Boost 27.5
$579.99
An industry-leading wheelset that makes upgrading to carbon wheels an easy decision. Rapid Drive 108 hubs provide instant engagement, while OCLV Carbon rims add confidence with best-in-class strength and durability. Line Pro 30 wheels crush the competition and are ready to conquer any trail. Key features: - OCLV Pro Carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 and Stacked Lacing dramatically increase wheel stiffness - Ultra-durable OCLV Carbon rim with 29mm internal 36mm external width 28 hole fr/r - 28 front/rear DT Swiss Aerolite14/17G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool
Bontrager Paradigm Elite Road Wheel TLR
$374.99 - $574.99
Weighing less than 1500g per set, Paradigm wheels deliver a combination of top-performance and superb ride quality with a 19.5mm width, DT 240 internals with an 18-tooth free hub, and a great weight-to-stiffness ratio. - Stacked Lacing provides a better spoke bracing angle for a stiffer wheel - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Offset spoke bed reduces wheel dish for stiff and stable performance - 6061 alloy rim 25mm outer, 19.5mm inner width, DT Swiss hubs - Shimano 10/11, SRAM 10/11, Campagnolo (freehub sold separately) - Includes Tubeless Ready (TLR) rim strip, TLR valve stem, internal cam quick release - No rider weight restrictions
Bontrager Kovee Elite 23 TLR Boost 29
$314.99 - $384.99
Admit it—your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Elite 23 wheelset. Designed with the XC and trail rider in mind, these Boost-width wheels will shave weight and add stiffness to your ride. Key features: - OCLV Carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 54 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 wider hub flanges enhance bracing angle for stiffer wheel - Ultra-durable OCLV Carbon rim with 22.5mm internal 29mm external width 28 hole fr/r - 28 front/rear 14G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool
DT Swiss XM 1700 SPLINE 27.5-inch Rear
$539.90
The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36-tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications
Stan's NoTubes Flow MK3 27.5 Front Wheels
$309.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Origin8 Track Attack 42mm Fixie Wheelset
$267.59
Origin-8's Track Attack 42mm Fixie Wheelset comes in a rainbow of colors, from the subdued to the bold, so you'll know your ride is the sharpest on the block. But, they're not just a pretty face. They feature 42mm deep aluminum rims, sealed cartridge bearings and reliable DT Swiss spokes to roll strong and sure over less-than-ideal surfaces. And, they come with a flip-flop rear hub so you can choose between fixed and freewheeling!
Bontrager Aeolus Pro 3V TLR Boost Disc Rear Road Wheel
$719.99
A strong, light, and durable carbon Boost road wheel with a 25mm inner width and Rapid Drive 108 hub that's perfect for higher-volume road and gravel tires. Aeolus Pro 3V is the ultimate road disc upgrade. It has a wider 25mm internal rim so you can run lower pressure for better tire support, added traction, better cornering, and a faster, more comfortable ride. Plus, a Rapid Drive 108 road hub with Boost 148 spacing adds snappy engagement for an all-around better, more confident ride. Product details - OCLV Pro Carbon offers an optimized blend of weight, strength, and durability - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - 25mm inner rim width (32mm outer) for added tire support to suit larger-volume road and gravel tires - Rapid Drive 108 road hubs provide quick engagement for faster acceleration and increased control - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Boost 148 wider hub flanges enhance bracing angle for stiffer wheel - No rider weight limit
Stan's NoTubes Baron S1
$289.00 - $479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
Stolen Rampage 20-inch Front Wheel
$64.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz
Race Face Turbine R 27.5-inch Front Wheel
$399.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
DT Swiss EXC 1200 SPLINE 35 Front
$1,175.90
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 35 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs.
DT Swiss ARC 1100 Dicut 48 Rear
$1,728.00
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
ENVE M635 27.5-inch I9 Wheelset
$2,550.00
What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
ENVE AM30 650B Wheelset
$1,600.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology
Stan's NoTubes Arch CB7 29-inch Rear
$720.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
DT Swiss ERC 1100 Dicut 47 Front
$1,264.90
Whatever road you choose, the ERC 1100 DICUT delivers the best performance. The benchmark Aero+ concept developed with DT's partner SWISS SIDE generates maximum speed and unparalleled handling characteristics. The guts of this outstanding wheel are its innovative components, being assembled with regard on every small detail. These wheels leave you with no excuses and give you even more reasons to get out and ride — wherever the road may take you.
Zipp 30 Course Disc Brake Rear Wheel (Tubular)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Rear
$1,049.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Rear
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
DT Swiss HG 1800 SPLINE 25 650B Front
$227.90
The HG 1800 SPLINE 25 combines Swiss precision and noble reserve. On closer inspection of the reliable e-specific components, it is clear that this wheelset won't let you down. Reinforced spokes, e-bike-specific hub components, and a super-durable rim make for a high-quality wheelset at an attractive price point.
Easton EC90 Aero 55 Rear
$1,075.00
Talk about features! These wheels have everything anyone could ever ask for: leading aerodynamics, certified Road Tubeless compatibility without rim strips, unrivaled braking performance, outstanding durability and competitive weight. Don’t take our word for it - check out the results from our exhaustive wind tunnel testing. Riding these wheels in a 40-kilometer time trial saves a whopping 14 seconds over the next fastest wheel. Riders concerned with finishing times and power output can’t afford not to buy these groundbreaking wheels. These aren’t simply race-day only wheels, they’re built strong. Easton’s industry-leading carbon lay-up process provides smooth, consistent braking. Like every high-end wheel in the Easton line, EC90 Aero 55 wheels are entirely built by hand from start to finish and acoustically tuned. These wheels combine top-end materials, a methodical build and an advanced rim design. They are extraordinarily fast wheels that will roll true for years to come.
DT Swiss XMC 1200 Spline 30 27.5-inch Rear
$1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheelset.
DT Swiss EX 1501 Spline ONE 25 27.5-inch Front
$509.00 - $522.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
Whisky Parts Co. No.9 36w Rear 27.5-inch
$875.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless setup and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Sta-Tru 24-inch Double Wall Rear Wheel
$76.49
Sta-Tru Double Wall Rear Wheels. - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 24-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm
Sta-Tru 700c Double Wall Front Wheel
$66.99
Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Valve: Schrader - Tire Type: Clincher
Page 1 of 6 Next page